• Easy to Install & WorkInstalling the wireless video doorbell no subscription is hassle-free. Just connect the doorbell and monitor via 2.4G Bluetooth. NO subscription, NO monthly fee, NO WiFi or APP required. You can use the included 3M adhesive or screws to mount the doorbell where you want it.
• Two-Way TalkThe doorbell with camera and monitor features two-way talk, when a visitor presses the button on the doorbell, you can see and communicate with your visitors at your door. Presses and hold the dial key to speak, release it to send your audio and receive the audio from your visitor.
• HD 1080P Video & Night VisionOur video doorbell camera wireless boasts a high-definition 8MP resolution and 170 wide-angle lens, ensuring every detail is captured. There's a LED night light that turns on automatically when someone visit at the night, guaranteeing visibility even in low-light conditions.
• 4.3 IPS Screen & Automatic Capture or Video RecordingThe door bell camera automatically capture or record when a visitor presses the button and save it on the TF card (TF card not included). You can view them on the 4.3 screen. Please note that the monitor need to be plug in.
• Rechargeable BatteryThis doorbell camera wireless no subscription also achieves lower power consumption and fast recharge(2-3hrs to full). Powered by rechargeable 1000mAh polymer battery with standby time is 3-6 months, working time is 2-4 months. Please note that the monitor need to be plug in.
• Weather Resistant for Indoor OutdoorIP65 waterproof design, can work in rainy day. Connection range is 164ft-262ft/50m-80m on open air, or 16.4ft-98ft/5m-30m if there are obstacles(door, wall and so on). Please test the signal of locations between the doorbell and monitor before installation.

How to install:
1.Please pair the doorbell with the monitor.
2.Please test the signal between those locations you want to place the doorbell and the monitor.The range of signal is 164ft-262ft on open air. The range of signal is 16ft-98ft if there are obstacles(door, wall, window and so on).
3.Please install the doorbell on the door via 3M self-adhesive tape or screws. It is recommended to install the upper end of the door handle if it is iron door. And 5ft far away the ground.
4.Please install the monitor in the place you want, the monitor need to be charged by 5V charger(not included) and USB cable.

How to remove the doorbell from the back plate:
1.Remove the doorbell by pressing the back plate with your thumb.

How to work 2-way audio:
1.If ring the doorbell, the doorbell will connect with monitor, then press the dial key to start the 2-way audio.
2.The doorbell requires no action. Presses and hold the dial key to speak, release it to send your audio and receive the audio from your visitor. It is similar to how a walkie-talkie works.
3.If no need to talk, press the dial key again to turn off 2-way audio.

Please Note:
1.The wall, window, metal door and so on, they will weaken the signal, please test and install the doorbell in a place with good signal.
2.It isn't motion activated. If no one presses the doorbell, it enters the standby mode, and the monitor can't activate the doorbell camera.
3.The doorbell camera automatically capture and record a video for 20-25 second when ring the doorbell(with a TF card inserted).
4.There is the echo if the monitor is too close to the doorbell, please move them away or lower the volume.
5.Please note that the monitor need to be charged with a 5V charger(not included) and USB cable.

Specifications:
Lens module: GC1084
Monitorscreen : 4.3 inch IPS screen
Resolution: 640 * 480
Viewing angle: 170
Type of Night vision: LED fill light
Waterproof rating: IP65
Monitors battery: Rechargeable 400mAh Li-ion battery
Doorbells battery: Rechargeable 1000mAh Li-ion battery
Charging time: Charging 2-3 hours for full by 5V charger
Transmission protocol: 2.4G Bluetooth, 433MHz
Range: 164ft-262ft if no obstacles;16ft-98ft if there are obstacles
Storage mode: Built-in storage external TF card storage (support 8G-32G TF card, TF card not included)
Operating voltage: DC5V/1A
Power interface: USB/type-C

Package included:
1*Doorbell
1*Monitor
1*3M adhesive
1*USB cable
1*Back plate
1*Set of screw
1*User manual